Resetting Your GE Smart Light Bulb

[AppDefects]

If you need to reset the software in your GE smart light bulb -- firmware version 2.8 or later -- just follow these easy instructions. These are "smart tips" from GE with more than 900,000 views!

Start with your bulb off for at least 5 seconds.

1. Turn on for 8 seconds
2. Turn off for 2 seconds
3. Turn on for 8 seconds
4. Turn off for 2 seconds
5. Turn on for 8 seconds
6. Turn off for 2 seconds
7. Turn on for 8 seconds
8. Turn off for 2 seconds
9. Turn on for 8 seconds
10. Turn off for 2 seconds
11. Turn on

Bulb will flash on and off 3 times if it has been successfully reset.

Welcome to the future!

[rslade]

> AppDefects (Contributor III) posted a new topic in Tech Talk on 07-12-2019 12:13

> If you need to reset the software in your GE smart light bulb -- firmware
> version 2.8 or later -- just follow these easy instructions. These are "smart
> tips" from GE with more than 900,000 views!   Start with your bulb off for at
> least 5 seconds. Turn on for 8 seconds Turn off for 2 seconds Turn on for 8
> seconds Turn off for 2 seconds Turn on for 8 seconds Turn off for 2 seconds Turn
> on for 8 seconds Turn off for 2 seconds Turn on for 8 seconds Turn off for 2
> seconds Turn onBulb will flash on and off 3 times if it has been successfully
> reset.

"Easy?" Wouldn't it be easier just to turn it on and off to flash the morse SOS
pattern?

====================== (quote inserted randomly by Pegasus Mailer)
rslade@vcn.bc.ca slade@victoria.tc.ca rslade@computercrime.org
I always prefer to believe the best of everybody; it saves so
much trouble. - Rudyard Kipling
victoria.tc.ca/techrev/rms.htm http://twitter.com/rslade
http://blogs.securiteam.com/index.php/archives/author/p1/
https://is.gd/RotlWB

[CraginS]

why would you want a bulb that some teenager in Ottawa can turn on and off at  will?